DVSA Statistics
1996 Alfa Romeo 146
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1996 Alfa Romeo 146 (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 11 DVSA anonymised MOT tests · About this data
Pass Rate
81.8%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 11 recorded tests.
Pre-MOT Checklist for 1996 Alfa Romeo 146
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 4
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Alfa Romeo 146.
Frequently Asked Questions
Is a 1996 Alfa Romeo 146 likely to fail its MOT?
Based on DVSA statistics, the 1996 Alfa Romeo 146 has a 81.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1996 Alfa Romeo 146?
The most common MOT failure reasons for a 1996 Alfa Romeo 146 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, the aim of a headlamp is not within limits laid down in the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1996 Alfa Romeo 146 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, the aim of a headlamp is not within limits laid down in the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1996 Alfa Romeo 146s fail their MOT?
Around 18% of 1996 Alfa Romeo 146s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 1996 Alfa Romeo 146 MOT?
Before your 1996 Alfa Romeo 146 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, the aim of a headlamp is not within limits laid down in the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1996 Alfa Romeo 146 reliable for MOT?
With a 81.8% MOT pass rate, the 1996 Alfa Romeo 146 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.