Skip to content
MOTCHECK
Beta

DVSA Statistics

1988 Alfa Romeo Sprint
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1988 Alfa Romeo Sprint (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

80%

Pass Rate

Based on 5 DVSA anonymised MOT tests · About this data

Pass Rate

80%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

10 minutes fix
Save Money

Headlight bulbs are a common MOT fail. Easy DIY replacement.

Fixes:The aim of a headlamp is not within limits laid down in the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    35%
  2. 2

    The aim of a headlamp is not within limits laid down in the requirements

    10%
  3. 3

    The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired

    10%
  4. 4

    A wheel bearing with excessive play

    10%
  5. 5

    An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning

    5%

Based on DVSA statistics from 5 recorded tests.

Pre-MOT Checklist for 1988 Alfa Romeo Sprint

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Alfa Romeo Sprint.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1988 Alfa Romeo Sprint likely to fail its MOT?

Based on DVSA statistics, the 1988 Alfa Romeo Sprint has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1988 Alfa Romeo Sprint?

The most common MOT failure reasons for a 1988 Alfa Romeo Sprint are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1988 Alfa Romeo Sprint fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1988 Alfa Romeo Sprints fail their MOT?

Around 20% of 1988 Alfa Romeo Sprints fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.

What should I check before my 1988 Alfa Romeo Sprint MOT?

Before your 1988 Alfa Romeo Sprint MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1988 Alfa Romeo Sprint reliable for MOT?

With a 80% MOT pass rate, the 1988 Alfa Romeo Sprint performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.