DVSA Statistics
2011 Aprilia City Cube
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2011 Aprilia City Cube (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2011 Aprilia City Cube
Based on common failure points for this model, check these items before your MOT:
- 1
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 2
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Aprilia City Cube.
Frequently Asked Questions
Is a 2011 Aprilia City Cube likely to fail its MOT?
Based on DVSA statistics, the 2011 Aprilia City Cube has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2011 Aprilia City Cube?
The most common MOT failure reasons for a 2011 Aprilia City Cube are: a shock absorber not functioning or leaking severely, steering head bearings excessively stiff, notchy, or with excessive wear or play. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2011 Aprilia City Cube fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a shock absorber not functioning or leaking severely, steering head bearings excessively stiff, notchy, or with excessive wear or play. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2011 Aprilia City Cubes fail their MOT?
Around 50% of 2011 Aprilia City Cubes fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a shock absorber not functioning or leaking severely and steering head bearings excessively stiff, notchy, or with excessive wear or play. Pre-checking these items can significantly improve your chances.
What should I check before my 2011 Aprilia City Cube MOT?
Before your 2011 Aprilia City Cube MOT, check these commonly-failed items: a shock absorber not functioning or leaking severely, steering head bearings excessively stiff, notchy, or with excessive wear or play. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2011 Aprilia City Cube reliable for MOT?
With a 50% MOT pass rate, the 2011 Aprilia City Cube performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.