Skip to content
MOTCHECK
Beta

DVSA Statistics

2000 Aprilia Leonardo
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2000 Aprilia Leonardo (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

83.3%

Pass Rate

Based on 6 DVSA anonymised MOT tests · About this data

Pass Rate

83.3%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake disc or drum significantly and obviously worn
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A shock absorber not functioning or leaking severely

    25%
  2. 2

    Contaminated with oil, grease etc

    25%
  3. 3

    Brake disc or drum significantly and obviously worn

    25%
  4. 4

    Brake calliper or cylinder excessively corroded

    25%

Based on DVSA statistics from 6 recorded tests.

Pre-MOT Checklist for 2000 Aprilia Leonardo

Based on common failure points for this model, check these items before your MOT:

  • 1

    Push down on each corner and release - car should bounce once only

    Suspension – Common fail on this model

  • 2

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Aprilia Leonardo.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2000 Aprilia Leonardo likely to fail its MOT?

Based on DVSA statistics, the 2000 Aprilia Leonardo has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2000 Aprilia Leonardo?

The most common MOT failure reasons for a 2000 Aprilia Leonardo are: a shock absorber not functioning or leaking severely, contaminated with oil, grease etc, brake disc or drum significantly and obviously worn. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2000 Aprilia Leonardo fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a shock absorber not functioning or leaking severely, contaminated with oil, grease etc, brake disc or drum significantly and obviously worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2000 Aprilia Leonardos fail their MOT?

Around 17% of 2000 Aprilia Leonardos fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a shock absorber not functioning or leaking severely and contaminated with oil, grease etc. Pre-checking these items can significantly improve your chances.

What should I check before my 2000 Aprilia Leonardo MOT?

Before your 2000 Aprilia Leonardo MOT, check these commonly-failed items: a shock absorber not functioning or leaking severely, contaminated with oil, grease etc, brake disc or drum significantly and obviously worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2000 Aprilia Leonardo reliable for MOT?

With a 83.3% MOT pass rate, the 2000 Aprilia Leonardo performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.