DVSA Statistics
2016 Aprilia Rs
MOT Pass Rate & Pre-MOT Checklist
Used 2016 Aprilia Rss usually pass their MOT, but around 1 in 7 still fail, most often for brake lining or pad worn below 1.0mm, a transmission belt, chain, sprocket or pulley excessively loose or worn and a shock absorber not functioning or leaking severely. Based on 185 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 185 DVSA anonymised MOT tests · About this data
Pass Rate
84.9%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 185 recorded tests.
Pre-MOT Checklist for 2016 Aprilia Rs
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Aprilia Rs.
Frequently Asked Questions
Is a 2016 Aprilia Rs likely to fail its MOT?
Based on DVSA statistics, the 2016 Aprilia Rs has a 84.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2016 Aprilia Rs?
The most common MOT failure reasons for a 2016 Aprilia Rs are: brake lining or pad worn below 1.0mm, a transmission belt, chain, sprocket or pulley excessively loose or worn, a shock absorber not functioning or leaking severely. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2016 Aprilia Rs fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake lining or pad worn below 1.0mm, a transmission belt, chain, sprocket or pulley excessively loose or worn, a shock absorber not functioning or leaking severely. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2016 Aprilia Rss fail their MOT?
Around 15% of 2016 Aprilia Rss fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are brake lining or pad worn below 1.0mm and a transmission belt, chain, sprocket or pulley excessively loose or worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2016 Aprilia Rs MOT?
Before your 2016 Aprilia Rs MOT, check these commonly-failed items: brake lining or pad worn below 1.0mm, a transmission belt, chain, sprocket or pulley excessively loose or worn, a shock absorber not functioning or leaking severely. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2016 Aprilia Rs reliable for MOT?
With a 84.9% MOT pass rate, the 2016 Aprilia Rs performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.