DVSA Statistics
2010 Aprilia Sx
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Aprilia Sx (only 4 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 4 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Indicator bulbs are quick and cheap to replace.
Based on DVSA statistics from 4 recorded tests.
Pre-MOT Checklist for 2010 Aprilia Sx
Based on common failure points for this model, check these items before your MOT:
- 1
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Aprilia Sx.
Frequently Asked Questions
Is a 2010 Aprilia Sx likely to fail its MOT?
Based on DVSA statistics, the 2010 Aprilia Sx has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2010 Aprilia Sx?
The most common MOT failure reasons for a 2010 Aprilia Sx are: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm, brake disc or drum significantly and obviously worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Aprilia Sx fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm, brake disc or drum significantly and obviously worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Aprilia Sxs fail their MOT?
Around 50% of 2010 Aprilia Sxs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning and brake lining or pad worn below 1.0mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Aprilia Sx MOT?
Before your 2010 Aprilia Sx MOT, check these commonly-failed items: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm, brake disc or drum significantly and obviously worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Aprilia Sx reliable for MOT?
With a 50% MOT pass rate, the 2010 Aprilia Sx performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.