DVSA Statistics
1986 Audi 100
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1986 Audi 100 (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 8 DVSA anonymised MOT tests · About this data
Pass Rate
75%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Brake light bulbs are easy to replace yourself.
Based on DVSA statistics from 8 recorded tests.
Pre-MOT Checklist for 1986 Audi 100
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
- 4
Ensure all doors open and close properly and latches engage
Bodywork – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi 100.
Frequently Asked Questions
Is a 1986 Audi 100 likely to fail its MOT?
Based on DVSA statistics, the 1986 Audi 100 has a 75% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1986 Audi 100?
The most common MOT failure reasons for a 1986 Audi 100 are: a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a suspension joint dust cover severely deteriorated, emissions levels exceed default limits. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1986 Audi 100 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a suspension joint dust cover severely deteriorated, emissions levels exceed default limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1986 Audi 100s fail their MOT?
Around 25% of 1986 Audi 100s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc and a suspension joint dust cover severely deteriorated. Pre-checking these items can significantly improve your chances.
What should I check before my 1986 Audi 100 MOT?
Before your 1986 Audi 100 MOT, check these commonly-failed items: a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a suspension joint dust cover severely deteriorated, emissions levels exceed default limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1986 Audi 100 reliable for MOT?
With a 75% MOT pass rate, the 1986 Audi 100 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.