DVSA Statistics
1993 Audi 100
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1993 Audi 100 (only 29 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 29 DVSA anonymised MOT tests · About this data
Pass Rate
69%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 29 recorded tests.
Pre-MOT Checklist for 1993 Audi 100
Based on common failure points for this model, check these items before your MOT:
- 1
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi 100.
Frequently Asked Questions
Is a 1993 Audi 100 likely to fail its MOT?
Based on DVSA statistics, the 1993 Audi 100 has a 69% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1993 Audi 100?
The most common MOT failure reasons for a 1993 Audi 100 are: windscreen washers not working or not providing sufficient fluid to clear the windscreen, lambda coefficient outside the default limits or the range specified by the manufacturer, emissions levels exceed default limits. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1993 Audi 100 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: windscreen washers not working or not providing sufficient fluid to clear the windscreen, lambda coefficient outside the default limits or the range specified by the manufacturer, emissions levels exceed default limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1993 Audi 100s fail their MOT?
Around 31% of 1993 Audi 100s fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are windscreen washers not working or not providing sufficient fluid to clear the windscreen and lambda coefficient outside the default limits or the range specified by the manufacturer. Pre-checking these items can significantly improve your chances.
What should I check before my 1993 Audi 100 MOT?
Before your 1993 Audi 100 MOT, check these commonly-failed items: windscreen washers not working or not providing sufficient fluid to clear the windscreen, lambda coefficient outside the default limits or the range specified by the manufacturer, emissions levels exceed default limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1993 Audi 100 reliable for MOT?
With a 69% MOT pass rate, the 1993 Audi 100 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.