DVSA Statistics
1996 Audi A3
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1996 Audi A3 (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
58.3%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 1996 Audi A3
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi A3.
Frequently Asked Questions
Is a 1996 Audi A3 likely to fail its MOT?
Based on DVSA statistics, the 1996 Audi A3 has a 58.3% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1996 Audi A3?
The most common MOT failure reasons for a 1996 Audi A3 are: brake disc or drum excessively weakened, insecure or fractured, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1996 Audi A3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake disc or drum excessively weakened, insecure or fractured, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1996 Audi A3s fail their MOT?
Around 42% of 1996 Audi A3s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are brake disc or drum excessively weakened, insecure or fractured and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1996 Audi A3 MOT?
Before your 1996 Audi A3 MOT, check these commonly-failed items: brake disc or drum excessively weakened, insecure or fractured, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1996 Audi A3 reliable for MOT?
With a 58.3% MOT pass rate, the 1996 Audi A3 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.