DVSA Statistics
2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa
MOT Pass Rate & Pre-MOT Checklist
Used 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sas usually pass their MOT, but around 3% still fail, most often for tyre tread depth not in accordance with the requirements, a brake lining or pad worn below 1.5mm and a tyre seriously damaged. Based on 173 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 173 DVSA anonymised MOT tests · About this data
Pass Rate
97.1%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 173 recorded tests.
Pre-MOT Checklist for 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi Q5 S Line 45 Tfsi Mhev Quat Sa.
Frequently Asked Questions
Is a 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa likely to fail its MOT?
Based on DVSA statistics, the 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa has a 97.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa?
The most common MOT failure reasons for a 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa are: tyre tread depth not in accordance with the requirements, a brake lining or pad worn below 1.5mm, a tyre seriously damaged. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, a brake lining or pad worn below 1.5mm, a tyre seriously damaged. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sas fail their MOT?
Around 3% of 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sas fail their MOT test. The most common reasons are tyre tread depth not in accordance with the requirements and a brake lining or pad worn below 1.5mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa MOT?
Before your 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, a brake lining or pad worn below 1.5mm, a tyre seriously damaged. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa reliable for MOT?
With a 97.1% MOT pass rate, the 2020 Audi Q5 S Line 45 Tfsi Mhev Quat Sa performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.