DVSA Statistics
2003 Audi Rs6
MOT Pass Rate & Pre-MOT Checklist
Used 2003 Audi Rs6s usually pass their MOT, but around 1 in 7 still fail, most often for brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn and emissions levels exceed the manufacturer's specified limits. Based on 111 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 111 DVSA anonymised MOT tests · About this data
Pass Rate
86.5%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 111 recorded tests.
Pre-MOT Checklist for 2003 Audi Rs6
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 4
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi Rs6.
Frequently Asked Questions
Is a 2003 Audi Rs6 likely to fail its MOT?
Based on DVSA statistics, the 2003 Audi Rs6 has a 86.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2003 Audi Rs6?
The most common MOT failure reasons for a 2003 Audi Rs6 are: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2003 Audi Rs6 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2003 Audi Rs6s fail their MOT?
Around 14% of 2003 Audi Rs6s fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2003 Audi Rs6 MOT?
Before your 2003 Audi Rs6 MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2003 Audi Rs6 reliable for MOT?
With a 86.5% MOT pass rate, the 2003 Audi Rs6 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.