DVSA Statistics
2013 Audi S3
MOT Pass Rate & Pre-MOT Checklist
Used 2013 Audi S3s usually pass their MOT, but around 1 in 8 still fail, most often for tyre tread depth not in accordance with the requirements, brake disc or drum excessively weakened, insecure or fractured and a brake lining or pad worn below 1.5mm. Based on 251 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 251 DVSA anonymised MOT tests · About this data
Pass Rate
87.3%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 251 recorded tests.
Pre-MOT Checklist for 2013 Audi S3
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi S3.
Frequently Asked Questions
Is a 2013 Audi S3 likely to fail its MOT?
Based on DVSA statistics, the 2013 Audi S3 has a 87.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2013 Audi S3?
The most common MOT failure reasons for a 2013 Audi S3 are: tyre tread depth not in accordance with the requirements, brake disc or drum excessively weakened, insecure or fractured, a brake lining or pad worn below 1.5mm. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2013 Audi S3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, brake disc or drum excessively weakened, insecure or fractured, a brake lining or pad worn below 1.5mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2013 Audi S3s fail their MOT?
Around 13% of 2013 Audi S3s fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are tyre tread depth not in accordance with the requirements and brake disc or drum excessively weakened, insecure or fractured. Pre-checking these items can significantly improve your chances.
What should I check before my 2013 Audi S3 MOT?
Before your 2013 Audi S3 MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, brake disc or drum excessively weakened, insecure or fractured, a brake lining or pad worn below 1.5mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2013 Audi S3 reliable for MOT?
With a 87.3% MOT pass rate, the 2013 Audi S3 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.