DVSA Statistics
2000 Audi S6
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2000 Audi S6 (only 16 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 16 DVSA anonymised MOT tests · About this data
Pass Rate
81.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 16 recorded tests.
Pre-MOT Checklist for 2000 Audi S6
Based on common failure points for this model, check these items before your MOT:
- 1
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi S6.
Frequently Asked Questions
Is a 2000 Audi S6 likely to fail its MOT?
Based on DVSA statistics, the 2000 Audi S6 has a 81.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2000 Audi S6?
The most common MOT failure reasons for a 2000 Audi S6 are: the aim of a headlamp is not within limits laid down in the requirements, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Audi S6 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the aim of a headlamp is not within limits laid down in the requirements, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Audi S6s fail their MOT?
Around 19% of 2000 Audi S6s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are the aim of a headlamp is not within limits laid down in the requirements and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Audi S6 MOT?
Before your 2000 Audi S6 MOT, check these commonly-failed items: the aim of a headlamp is not within limits laid down in the requirements, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Audi S6 reliable for MOT?
With a 81.3% MOT pass rate, the 2000 Audi S6 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.