DVSA Statistics
2008 Audi S6
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2008 Audi S6 (only 27 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 27 DVSA anonymised MOT tests · About this data
Pass Rate
77.8%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 27 recorded tests.
Pre-MOT Checklist for 2008 Audi S6
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi S6.
Frequently Asked Questions
Is a 2008 Audi S6 likely to fail its MOT?
Based on DVSA statistics, the 2008 Audi S6 has a 77.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2008 Audi S6?
The most common MOT failure reasons for a 2008 Audi S6 are: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 Audi S6 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 Audi S6s fail their MOT?
Around 22% of 2008 Audi S6s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a tyre seriously damaged. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 Audi S6 MOT?
Before your 2008 Audi S6 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 Audi S6 reliable for MOT?
With a 77.8% MOT pass rate, the 2008 Audi S6 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.