DVSA Statistics
2016 Audi Sq5
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2016 Audi Sq5 (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
82.4%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 2016 Audi Sq5
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Audi Sq5.
Frequently Asked Questions
Is a 2016 Audi Sq5 likely to fail its MOT?
Based on DVSA statistics, the 2016 Audi Sq5 has a 82.4% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2016 Audi Sq5?
The most common MOT failure reasons for a 2016 Audi Sq5 are: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, a tyre has a lump, bulge or tear caused by separation or partial failure of its structure. this includes any lifting of the tread rubber. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2016 Audi Sq5 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, a tyre has a lump, bulge or tear caused by separation or partial failure of its structure. this includes any lifting of the tread rubber. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2016 Audi Sq5s fail their MOT?
Around 18% of 2016 Audi Sq5s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a tyre seriously damaged. Pre-checking these items can significantly improve your chances.
What should I check before my 2016 Audi Sq5 MOT?
Before your 2016 Audi Sq5 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, a tyre has a lump, bulge or tear caused by separation or partial failure of its structure. this includes any lifting of the tread rubber. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2016 Audi Sq5 reliable for MOT?
With a 82.4% MOT pass rate, the 2016 Audi Sq5 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.