DVSA Statistics
1980 Austin Morris Mini 1000
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1980 Austin Morris Mini 1000 (only 28 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 28 DVSA anonymised MOT tests · About this data
Pass Rate
78.6%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 28 recorded tests.
Pre-MOT Checklist for 1980 Austin Morris Mini 1000
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Austin Morris Mini 1000.
Frequently Asked Questions
Is a 1980 Austin Morris Mini 1000 likely to fail its MOT?
Based on DVSA statistics, the 1980 Austin Morris Mini 1000 has a 78.6% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1980 Austin Morris Mini 1000?
The most common MOT failure reasons for a 1980 Austin Morris Mini 1000 are: a suspension pin, bush or joint excessively worn, windscreen washers not working or not providing sufficient fluid to clear the windscreen, a wheel bearing with excessive play. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1980 Austin Morris Mini 1000 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, windscreen washers not working or not providing sufficient fluid to clear the windscreen, a wheel bearing with excessive play. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1980 Austin Morris Mini 1000s fail their MOT?
Around 21% of 1980 Austin Morris Mini 1000s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and windscreen washers not working or not providing sufficient fluid to clear the windscreen. Pre-checking these items can significantly improve your chances.
What should I check before my 1980 Austin Morris Mini 1000 MOT?
Before your 1980 Austin Morris Mini 1000 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, windscreen washers not working or not providing sufficient fluid to clear the windscreen, a wheel bearing with excessive play. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1980 Austin Morris Mini 1000 reliable for MOT?
With a 78.6% MOT pass rate, the 1980 Austin Morris Mini 1000 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.