DVSA Statistics
1988 Austin Metro City X
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1988 Austin Metro City X (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 11 DVSA anonymised MOT tests · About this data
Pass Rate
45.5%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 11 recorded tests.
Pre-MOT Checklist for 1988 Austin Metro City X
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Austin Metro City X.
Frequently Asked Questions
Is a 1988 Austin Metro City X likely to fail its MOT?
Based on DVSA statistics, the 1988 Austin Metro City X has a 45.5% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1988 Austin Metro City X?
The most common MOT failure reasons for a 1988 Austin Metro City X are: a tyre seriously damaged, emissions levels exceed default limits, brake pipe damaged or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1988 Austin Metro City X fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre seriously damaged, emissions levels exceed default limits, brake pipe damaged or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1988 Austin Metro City Xs fail their MOT?
Around 55% of 1988 Austin Metro City Xs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a tyre seriously damaged and emissions levels exceed default limits. Pre-checking these items can significantly improve your chances.
What should I check before my 1988 Austin Metro City X MOT?
Before your 1988 Austin Metro City X MOT, check these commonly-failed items: a tyre seriously damaged, emissions levels exceed default limits, brake pipe damaged or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1988 Austin Metro City X reliable for MOT?
With a 45.5% MOT pass rate, the 1988 Austin Metro City X performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.