DVSA Statistics
1982 Austin Mini 1000 Hl E
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1982 Austin Mini 1000 Hl E (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
94.1%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 1982 Austin Mini 1000 Hl E
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Austin Mini 1000 Hl E.
Frequently Asked Questions
Is a 1982 Austin Mini 1000 Hl E likely to fail its MOT?
Based on DVSA statistics, the 1982 Austin Mini 1000 Hl E has a 94.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1982 Austin Mini 1000 Hl E?
The most common MOT failure reasons for a 1982 Austin Mini 1000 Hl E are: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, play in steering rack inner joint(s). Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1982 Austin Mini 1000 Hl E fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, play in steering rack inner joint(s). Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1982 Austin Mini 1000 Hl Es fail their MOT?
Around 6% of 1982 Austin Mini 1000 Hl Es fail their MOT test, meaning roughly 1 in 17 don't pass first time. The most common reasons are a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1982 Austin Mini 1000 Hl E MOT?
Before your 1982 Austin Mini 1000 Hl E MOT, check these commonly-failed items: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, play in steering rack inner joint(s). Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1982 Austin Mini 1000 Hl E reliable for MOT?
With a 94.1% MOT pass rate, the 1982 Austin Mini 1000 Hl E performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.