DVSA Statistics
1993 Austin Mini Moke
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1993 Austin Mini Moke (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1993 Austin Mini Moke
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Austin Mini Moke.
Frequently Asked Questions
Is a 1993 Austin Mini Moke likely to fail its MOT?
Based on DVSA statistics, the 1993 Austin Mini Moke has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1993 Austin Mini Moke?
The most common MOT failure reasons for a 1993 Austin Mini Moke are: a tyre valve seriously damaged or misaligned likely to cause sudden deflation of the tyre, service brake efficiency less than 50% of the required value, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1993 Austin Mini Moke fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre valve seriously damaged or misaligned likely to cause sudden deflation of the tyre, service brake efficiency less than 50% of the required value, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1993 Austin Mini Mokes fail their MOT?
Around 50% of 1993 Austin Mini Mokes fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a tyre valve seriously damaged or misaligned likely to cause sudden deflation of the tyre and service brake efficiency less than 50% of the required value. Pre-checking these items can significantly improve your chances.
What should I check before my 1993 Austin Mini Moke MOT?
Before your 1993 Austin Mini Moke MOT, check these commonly-failed items: a tyre valve seriously damaged or misaligned likely to cause sudden deflation of the tyre, service brake efficiency less than 50% of the required value, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1993 Austin Mini Moke reliable for MOT?
With a 50% MOT pass rate, the 1993 Austin Mini Moke performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.