DVSA Statistics
1988 Austin Mini Red Hot
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1988 Austin Mini Red Hot (only 36 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 36 DVSA anonymised MOT tests · About this data
Pass Rate
80.6%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 36 recorded tests.
Pre-MOT Checklist for 1988 Austin Mini Red Hot
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Austin Mini Red Hot.
Frequently Asked Questions
Is a 1988 Austin Mini Red Hot likely to fail its MOT?
Based on DVSA statistics, the 1988 Austin Mini Red Hot has a 80.6% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1988 Austin Mini Red Hot?
The most common MOT failure reasons for a 1988 Austin Mini Red Hot are: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1988 Austin Mini Red Hot fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1988 Austin Mini Red Hots fail their MOT?
Around 19% of 1988 Austin Mini Red Hots fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a wheel bearing with excessive play. Pre-checking these items can significantly improve your chances.
What should I check before my 1988 Austin Mini Red Hot MOT?
Before your 1988 Austin Mini Red Hot MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1988 Austin Mini Red Hot reliable for MOT?
With a 80.6% MOT pass rate, the 1988 Austin Mini Red Hot performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.