DVSA Statistics
1963 Austin Mini
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1963 Austin Mini (only 21 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 21 DVSA anonymised MOT tests · About this data
Pass Rate
90.5%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 21 recorded tests.
Pre-MOT Checklist for 1963 Austin Mini
Based on common failure points for this model, check these items before your MOT:
- 1
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Austin Mini.
Frequently Asked Questions
Is a 1963 Austin Mini likely to fail its MOT?
Based on DVSA statistics, the 1963 Austin Mini has a 90.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1963 Austin Mini?
The most common MOT failure reasons for a 1963 Austin Mini are: braking effort inadequate at a wheel, windscreen washers not working or not providing sufficient fluid to clear the windscreen, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1963 Austin Mini fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: braking effort inadequate at a wheel, windscreen washers not working or not providing sufficient fluid to clear the windscreen, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1963 Austin Minis fail their MOT?
Around 10% of 1963 Austin Minis fail their MOT test, meaning roughly 1 in 10 don't pass first time. The most common reasons are braking effort inadequate at a wheel and windscreen washers not working or not providing sufficient fluid to clear the windscreen. Pre-checking these items can significantly improve your chances.
What should I check before my 1963 Austin Mini MOT?
Before your 1963 Austin Mini MOT, check these commonly-failed items: braking effort inadequate at a wheel, windscreen washers not working or not providing sufficient fluid to clear the windscreen, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1963 Austin Mini reliable for MOT?
With a 90.5% MOT pass rate, the 1963 Austin Mini performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.