DVSA Statistics
1956 Austin Unclassified
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1956 Austin Unclassified (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Indicator bulbs are quick and cheap to replace.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 1956 Austin Unclassified
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Austin Unclassified.
Frequently Asked Questions
Is a 1956 Austin Unclassified likely to fail its MOT?
Based on DVSA statistics, the 1956 Austin Unclassified has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1956 Austin Unclassified?
The most common MOT failure reasons for a 1956 Austin Unclassified are: a suspension pin, bush or joint excessively worn, cable, rod or joint insecure, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1956 Austin Unclassified fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, cable, rod or joint insecure, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1956 Austin Unclassifieds fail their MOT?
Around 17% of 1956 Austin Unclassifieds fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and cable, rod or joint insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 1956 Austin Unclassified MOT?
Before your 1956 Austin Unclassified MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, cable, rod or joint insecure, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1956 Austin Unclassified reliable for MOT?
With a 83.3% MOT pass rate, the 1956 Austin Unclassified performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.