DVSA Statistics
1986 Bedford Cf2 Se
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1986 Bedford Cf2 Se (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1986 Bedford Cf2 Se
Based on common failure points for this model, check these items before your MOT:
- 1
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 2 MOT tests from the 2023 DVSA dataset. Your 1986 Bedford Cf2 Se was 37 years old when this data was collected and is now 40 years old.
Sample Size
Limited data - 2 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Bedford Cf2 Se.
Frequently Asked Questions
Is a 1986 Bedford Cf2 Se likely to fail its MOT?
Based on DVSA statistics, the 1986 Bedford Cf2 Se has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1986 Bedford Cf2 Se?
The most common MOT failure reasons for a 1986 Bedford Cf2 Se are: windscreen washers not working or not providing sufficient fluid to clear the windscreen, exhaust system leaking or insecure, a suspension joint dust cover severely deteriorated. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1986 Bedford Cf2 Se fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: windscreen washers not working or not providing sufficient fluid to clear the windscreen, exhaust system leaking or insecure, a suspension joint dust cover severely deteriorated. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1986 Bedford Cf2 Ses fail their MOT?
Around 50% of 1986 Bedford Cf2 Ses fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are windscreen washers not working or not providing sufficient fluid to clear the windscreen and exhaust system leaking or insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 1986 Bedford Cf2 Se MOT?
Before your 1986 Bedford Cf2 Se MOT, check these commonly-failed items: windscreen washers not working or not providing sufficient fluid to clear the windscreen, exhaust system leaking or insecure, a suspension joint dust cover severely deteriorated. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1986 Bedford Cf2 Se reliable for MOT?
With a 50% MOT pass rate, the 1986 Bedford Cf2 Se performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.