DVSA Statistics
1988 Bedford Rascal
MOT Pass Rate & Pre-MOT Checklist
Used 1988 Bedford Rascals usually pass their MOT, but around 1 in 3 still fail, most often for a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension pin, bush or joint excessively worn and brake pipe damaged or excessively corroded. Based on 73 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 73 DVSA anonymised MOT tests · About this data
Pass Rate
71.2%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 73 recorded tests.
Pre-MOT Checklist for 1988 Bedford Rascal
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Bedford Rascal.
Frequently Asked Questions
Is a 1988 Bedford Rascal likely to fail its MOT?
Based on DVSA statistics, the 1988 Bedford Rascal has a 71.2% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1988 Bedford Rascal?
The most common MOT failure reasons for a 1988 Bedford Rascal are: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1988 Bedford Rascal fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1988 Bedford Rascals fail their MOT?
Around 29% of 1988 Bedford Rascals fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1988 Bedford Rascal MOT?
Before your 1988 Bedford Rascal MOT, check these commonly-failed items: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1988 Bedford Rascal reliable for MOT?
With a 71.2% MOT pass rate, the 1988 Bedford Rascal performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.