Skip to content
MOTCHECK
Beta

DVSA Statistics

1987 Bedford Rascel
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1987 Bedford Rascel (only 3 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

66.7%

Pass Rate

Based on 3 DVSA anonymised MOT tests · About this data

Pass Rate

66.7%

About average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    50%
  2. 2

    Emissions levels exceed default limits

    50%

Based on DVSA statistics from 3 recorded tests.

Pre-MOT Checklist for 1987 Bedford Rascel

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Ensure engine is at operating temperature before test - take a good run beforehand

    Emissions – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Bedford Rascel.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1987 Bedford Rascel likely to fail its MOT?

Based on DVSA statistics, the 1987 Bedford Rascel has a 66.7% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 1987 Bedford Rascel?

The most common MOT failure reasons for a 1987 Bedford Rascel are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1987 Bedford Rascel fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1987 Bedford Rascels fail their MOT?

Around 33% of 1987 Bedford Rascels fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and emissions levels exceed default limits. Pre-checking these items can significantly improve your chances.

What should I check before my 1987 Bedford Rascel MOT?

Before your 1987 Bedford Rascel MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1987 Bedford Rascel reliable for MOT?

With a 66.7% MOT pass rate, the 1987 Bedford Rascel performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.