DVSA Statistics
1988 Bedford Unclassified
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1988 Bedford Unclassified (only 37 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 37 DVSA anonymised MOT tests · About this data
Pass Rate
73%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 37 recorded tests.
Pre-MOT Checklist for 1988 Bedford Unclassified
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 4
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
How Does This Compare to Other Years?
Previous Year
1987 Bedford Unclassified
Based on 26 UK MOT tests
Next Year
1989 Bedford Unclassified
Based on 22 UK MOT tests
The 1988 model shows improvement over 1987 but the 1989 model has an even better pass rate.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 37 MOT tests from the 2023 DVSA dataset. Your 1988 Bedford Unclassified was 35 years old when this data was collected and is now 38 years old.
Sample Size
Limited data - 37 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Bedford Unclassified.
Frequently Asked Questions
Is a 1988 Bedford Unclassified likely to fail its MOT?
Based on DVSA statistics, the 1988 Bedford Unclassified has a 73% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1988 Bedford Unclassified?
The most common MOT failure reasons for a 1988 Bedford Unclassified are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, the aim of a headlamp is not within limits laid down in the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1988 Bedford Unclassified fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, the aim of a headlamp is not within limits laid down in the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1988 Bedford Unclassifieds fail their MOT?
Around 27% of 1988 Bedford Unclassifieds fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a tyre seriously damaged. Pre-checking these items can significantly improve your chances.
What should I check before my 1988 Bedford Unclassified MOT?
Before your 1988 Bedford Unclassified MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, the aim of a headlamp is not within limits laid down in the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1988 Bedford Unclassified reliable for MOT?
With a 73% MOT pass rate, the 1988 Bedford Unclassified performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.