DVSA Statistics
2012 Benelli Tre
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Benelli Tre (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 8 DVSA anonymised MOT tests · About this data
Pass Rate
87.5%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Indicator bulbs are quick and cheap to replace.
Based on DVSA statistics from 8 recorded tests.
Pre-MOT Checklist for 2012 Benelli Tre
Based on common failure points for this model, check these items before your MOT:
- 1
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Benelli Tre.
Frequently Asked Questions
Is a 2012 Benelli Tre likely to fail its MOT?
Based on DVSA statistics, the 2012 Benelli Tre has a 87.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2012 Benelli Tre?
The most common MOT failure reasons for a 2012 Benelli Tre are: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Benelli Tre fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Benelli Tres fail their MOT?
Around 13% of 2012 Benelli Tres fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning and brake lining or pad worn below 1.0mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Benelli Tre MOT?
Before your 2012 Benelli Tre MOT, check these commonly-failed items: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Benelli Tre reliable for MOT?
With a 87.5% MOT pass rate, the 2012 Benelli Tre performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.