DVSA Statistics
1998 Bentley Arnage
MOT Pass Rate & Pre-MOT Checklist
Used 1998 Bentley Arnages usually pass their MOT, but around 1 in 8 still fail, most often for brake pipe damaged or excessively corroded, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc and an srs malfunction indicator lamp (mil) indicates a system malfunction. Based on 116 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 116 DVSA anonymised MOT tests · About this data
Pass Rate
87.1%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 116 recorded tests.
Pre-MOT Checklist for 1998 Bentley Arnage
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Bentley Arnage.
Frequently Asked Questions
Is a 1998 Bentley Arnage likely to fail its MOT?
Based on DVSA statistics, the 1998 Bentley Arnage has a 87.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1998 Bentley Arnage?
The most common MOT failure reasons for a 1998 Bentley Arnage are: brake pipe damaged or excessively corroded, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, an srs malfunction indicator lamp (mil) indicates a system malfunction. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1998 Bentley Arnage fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, an srs malfunction indicator lamp (mil) indicates a system malfunction. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1998 Bentley Arnages fail their MOT?
Around 13% of 1998 Bentley Arnages fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Pre-checking these items can significantly improve your chances.
What should I check before my 1998 Bentley Arnage MOT?
Before your 1998 Bentley Arnage MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, an srs malfunction indicator lamp (mil) indicates a system malfunction. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1998 Bentley Arnage reliable for MOT?
With a 87.1% MOT pass rate, the 1998 Bentley Arnage performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.