DVSA Statistics
1989 Bentley Mulsanne
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1989 Bentley Mulsanne (only 34 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 34 DVSA anonymised MOT tests · About this data
Pass Rate
85.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 34 recorded tests.
Pre-MOT Checklist for 1989 Bentley Mulsanne
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Bentley Mulsanne.
Frequently Asked Questions
Is a 1989 Bentley Mulsanne likely to fail its MOT?
Based on DVSA statistics, the 1989 Bentley Mulsanne has a 85.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1989 Bentley Mulsanne?
The most common MOT failure reasons for a 1989 Bentley Mulsanne are: a wheel bearing with excessive play, a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1989 Bentley Mulsanne fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a wheel bearing with excessive play, a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1989 Bentley Mulsannes fail their MOT?
Around 15% of 1989 Bentley Mulsannes fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are a wheel bearing with excessive play and a tyre seriously damaged. Pre-checking these items can significantly improve your chances.
What should I check before my 1989 Bentley Mulsanne MOT?
Before your 1989 Bentley Mulsanne MOT, check these commonly-failed items: a wheel bearing with excessive play, a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1989 Bentley Mulsanne reliable for MOT?
With a 85.3% MOT pass rate, the 1989 Bentley Mulsanne performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.