DVSA Statistics
1992 Bentley Mulsanne
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1992 Bentley Mulsanne (only 10 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 10 DVSA anonymised MOT tests · About this data
Pass Rate
90%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 10 recorded tests.
Pre-MOT Checklist for 1992 Bentley Mulsanne
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Bentley Mulsanne.
Frequently Asked Questions
Is a 1992 Bentley Mulsanne likely to fail its MOT?
Based on DVSA statistics, the 1992 Bentley Mulsanne has a 90% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1992 Bentley Mulsanne?
The most common MOT failure reasons for a 1992 Bentley Mulsanne are: a suspension pin, bush or joint excessively worn, brake performance unable to be tested, brake hoses or connections leaking on hydraulic systems. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1992 Bentley Mulsanne fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, brake performance unable to be tested, brake hoses or connections leaking on hydraulic systems. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1992 Bentley Mulsannes fail their MOT?
Around 10% of 1992 Bentley Mulsannes fail their MOT test, meaning roughly 1 in 10 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and brake performance unable to be tested. Pre-checking these items can significantly improve your chances.
What should I check before my 1992 Bentley Mulsanne MOT?
Before your 1992 Bentley Mulsanne MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, brake performance unable to be tested, brake hoses or connections leaking on hydraulic systems. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1992 Bentley Mulsanne reliable for MOT?
With a 90% MOT pass rate, the 1992 Bentley Mulsanne performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.