DVSA Statistics
2007 Beta 450rr
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2007 Beta 450rr (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2007 Beta 450rr
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Beta 450rr.
Frequently Asked Questions
Is a 2007 Beta 450rr likely to fail its MOT?
Based on DVSA statistics, the 2007 Beta 450rr has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2007 Beta 450rr?
The most common MOT failure reasons for a 2007 Beta 450rr are: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, a tyre not fitted in accordance with the direction of rotation marked on the side wall. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2007 Beta 450rr fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, a tyre not fitted in accordance with the direction of rotation marked on the side wall. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2007 Beta 450rrs fail their MOT?
Around 50% of 2007 Beta 450rrs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a wheel bearing with excessive play. Pre-checking these items can significantly improve your chances.
What should I check before my 2007 Beta 450rr MOT?
Before your 2007 Beta 450rr MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, a tyre not fitted in accordance with the direction of rotation marked on the side wall. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2007 Beta 450rr reliable for MOT?
With a 50% MOT pass rate, the 2007 Beta 450rr performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.