Skip to content
MOTCHECK
Beta

DVSA Statistics

1993 BMW 3 Series
MOT Pass Rate & Pre-MOT Checklist

Used 1993 BMW 3 Seriess usually pass their MOT, but around 1 in 5 still fail, most often for brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn and tyre tread depth not in accordance with the requirements. Based on 502 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

81.7%

Pass Rate

Based on 502 DVSA anonymised MOT tests · About this data

Pass Rate

81.7%

Higher than average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake pipe damaged or excessively corroded
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Brake pipe damaged or excessively corroded

    11.1%
  2. 2

    A suspension pin, bush or joint excessively worn

    7.7%
  3. 3

    Tyre tread depth not in accordance with the requirements

    4.3%
  4. 4

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    3.8%
  5. 5

    A tyre seriously damaged

    3.8%

Based on DVSA statistics from 502 recorded tests.

Pre-MOT Checklist for 1993 BMW 3 Series

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 2

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 3

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

How Does This Compare to Other Years?

The 1993 model has a lower pass rate than 1992, but performs better than 1994.

Why Trust This Data?

Official UK Government Source

This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.

Understanding the Statistics

This page is based on 502 MOT tests from the 2023 DVSA dataset. Your 1993 BMW 3 Series was 30 years old when this data was collected and is now 33 years old.

Sample Size

High confidence - 502 tests (statistically reliable)

Limitations

Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 3 Series.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1993 BMW 3 Series likely to fail its MOT?

Based on DVSA statistics, the 1993 BMW 3 Series has a 81.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1993 BMW 3 Series?

The most common MOT failure reasons for a 1993 BMW 3 Series are: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1993 BMW 3 Series fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1993 BMW 3 Seriess fail their MOT?

Around 18% of 1993 BMW 3 Seriess fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.

What should I check before my 1993 BMW 3 Series MOT?

Before your 1993 BMW 3 Series MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1993 BMW 3 Series reliable for MOT?

With a 81.7% MOT pass rate, the 1993 BMW 3 Series performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.