DVSA Statistics
2012 BMW 316
MOT Pass Rate & Pre-MOT Checklist
Used 2012 BMW 316s usually pass their MOT, but around 1 in 5 still fail, most often for tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn and brake disc or drum excessively weakened, insecure or fractured. Based on 559 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 559 DVSA anonymised MOT tests · About this data
Pass Rate
81%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 559 recorded tests.
Pre-MOT Checklist for 2012 BMW 316
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 316.
Frequently Asked Questions
Is a 2012 BMW 316 likely to fail its MOT?
Based on DVSA statistics, the 2012 BMW 316 has a 81% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2012 BMW 316?
The most common MOT failure reasons for a 2012 BMW 316 are: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, brake disc or drum excessively weakened, insecure or fractured. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 BMW 316 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, brake disc or drum excessively weakened, insecure or fractured. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 BMW 316s fail their MOT?
Around 19% of 2012 BMW 316s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are tyre tread depth not in accordance with the requirements and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 BMW 316 MOT?
Before your 2012 BMW 316 MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, brake disc or drum excessively weakened, insecure or fractured. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 BMW 316 reliable for MOT?
With a 81% MOT pass rate, the 2012 BMW 316 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.