DVSA Statistics
1987 BMW 520
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1987 BMW 520 (only 36 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 36 DVSA anonymised MOT tests · About this data
Pass Rate
77.8%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 36 recorded tests.
Pre-MOT Checklist for 1987 BMW 520
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 520.
Frequently Asked Questions
Is a 1987 BMW 520 likely to fail its MOT?
Based on DVSA statistics, the 1987 BMW 520 has a 77.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1987 BMW 520?
The most common MOT failure reasons for a 1987 BMW 520 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1987 BMW 520 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1987 BMW 520s fail their MOT?
Around 22% of 1987 BMW 520s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a tyre seriously damaged. Pre-checking these items can significantly improve your chances.
What should I check before my 1987 BMW 520 MOT?
Before your 1987 BMW 520 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1987 BMW 520 reliable for MOT?
With a 77.8% MOT pass rate, the 1987 BMW 520 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.