DVSA Statistics
2011 BMW 550
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2011 BMW 550 (only 22 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 22 DVSA anonymised MOT tests · About this data
Pass Rate
95.5%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 22 recorded tests.
Pre-MOT Checklist for 2011 BMW 550
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 550.
Frequently Asked Questions
Is a 2011 BMW 550 likely to fail its MOT?
Based on DVSA statistics, the 2011 BMW 550 has a 95.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2011 BMW 550?
The most common MOT failure reasons for a 2011 BMW 550 are: a tyre seriously damaged, a suspension pin, bush or joint excessively worn, brake fluid warning light illuminated or defective. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2011 BMW 550 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre seriously damaged, a suspension pin, bush or joint excessively worn, brake fluid warning light illuminated or defective. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2011 BMW 550s fail their MOT?
Around 5% of 2011 BMW 550s fail their MOT test, meaning roughly 1 in 20 don't pass first time. The most common reasons are a tyre seriously damaged and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2011 BMW 550 MOT?
Before your 2011 BMW 550 MOT, check these commonly-failed items: a tyre seriously damaged, a suspension pin, bush or joint excessively worn, brake fluid warning light illuminated or defective. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2011 BMW 550 reliable for MOT?
With a 95.5% MOT pass rate, the 2011 BMW 550 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.