DVSA Statistics
1989 BMW 6 Series
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1989 BMW 6 Series (only 30 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 30 DVSA anonymised MOT tests · About this data
Pass Rate
80%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 30 recorded tests.
Pre-MOT Checklist for 1989 BMW 6 Series
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 2
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 6 Series.
Frequently Asked Questions
Is a 1989 BMW 6 Series likely to fail its MOT?
Based on DVSA statistics, the 1989 BMW 6 Series has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1989 BMW 6 Series?
The most common MOT failure reasons for a 1989 BMW 6 Series are: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, emissions levels exceed default limits. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1989 BMW 6 Series fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, emissions levels exceed default limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1989 BMW 6 Seriess fail their MOT?
Around 20% of 1989 BMW 6 Seriess fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.
What should I check before my 1989 BMW 6 Series MOT?
Before your 1989 BMW 6 Series MOT, check these commonly-failed items: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, emissions levels exceed default limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1989 BMW 6 Series reliable for MOT?
With a 80% MOT pass rate, the 1989 BMW 6 Series performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.