DVSA Statistics
2008 BMW 6 Series
MOT Pass Rate & Pre-MOT Checklist
Used 2008 BMW 6 Seriess usually pass their MOT, but around 1 in 6 still fail, most often for a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements and a tyre seriously damaged. Based on 109 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 109 DVSA anonymised MOT tests · About this data
Pass Rate
83.5%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 109 recorded tests.
Pre-MOT Checklist for 2008 BMW 6 Series
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 6 Series.
Frequently Asked Questions
Is a 2008 BMW 6 Series likely to fail its MOT?
Based on DVSA statistics, the 2008 BMW 6 Series has a 83.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2008 BMW 6 Series?
The most common MOT failure reasons for a 2008 BMW 6 Series are: a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements, a tyre seriously damaged. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 BMW 6 Series fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements, a tyre seriously damaged. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 BMW 6 Seriess fail their MOT?
Around 17% of 2008 BMW 6 Seriess fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 BMW 6 Series MOT?
Before your 2008 BMW 6 Series MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements, a tyre seriously damaged. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 BMW 6 Series reliable for MOT?
With a 83.5% MOT pass rate, the 2008 BMW 6 Series performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.