DVSA Statistics
1991 BMW 7 Series
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1991 BMW 7 Series (only 1 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 1 DVSA anonymised MOT tests · About this data
Pass Rate
0%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Brake light bulbs are easy to replace yourself.
Based on DVSA statistics from 1 recorded tests.
Pre-MOT Checklist for 1991 BMW 7 Series
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure all doors open and close properly and latches engage
Bodywork – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
- 4
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 7 Series.
Frequently Asked Questions
Is a 1991 BMW 7 Series likely to fail its MOT?
Based on DVSA statistics, the 1991 BMW 7 Series has a 0% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1991 BMW 7 Series?
The most common MOT failure reasons for a 1991 BMW 7 Series are: a door will not open using the relevant control or close properly, a suspension pin, bush or joint excessively worn, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1991 BMW 7 Series fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a door will not open using the relevant control or close properly, a suspension pin, bush or joint excessively worn, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1991 BMW 7 Seriess fail their MOT?
Around 100% of 1991 BMW 7 Seriess fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are a door will not open using the relevant control or close properly and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1991 BMW 7 Series MOT?
Before your 1991 BMW 7 Series MOT, check these commonly-failed items: a door will not open using the relevant control or close properly, a suspension pin, bush or joint excessively worn, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1991 BMW 7 Series reliable for MOT?
With a 0% MOT pass rate, the 1991 BMW 7 Series performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.