DVSA Statistics
1980 BMW Alpina
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1980 BMW Alpina (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1980 BMW Alpina
Based on common failure points for this model, check these items before your MOT:
- 1
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW Alpina.
Frequently Asked Questions
Is a 1980 BMW Alpina likely to fail its MOT?
Based on DVSA statistics, the 1980 BMW Alpina has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1980 BMW Alpina?
The most common MOT failure reasons for a 1980 BMW Alpina are: a transmission shaft constant velocity joint boot severely deteriorated, a spring insecurely attached to chassis or axle, brake disc or drum excessively weakened, insecure or fractured. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1980 BMW Alpina fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a transmission shaft constant velocity joint boot severely deteriorated, a spring insecurely attached to chassis or axle, brake disc or drum excessively weakened, insecure or fractured. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1980 BMW Alpinas fail their MOT?
Around 50% of 1980 BMW Alpinas fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a transmission shaft constant velocity joint boot severely deteriorated and a spring insecurely attached to chassis or axle. Pre-checking these items can significantly improve your chances.
What should I check before my 1980 BMW Alpina MOT?
Before your 1980 BMW Alpina MOT, check these commonly-failed items: a transmission shaft constant velocity joint boot severely deteriorated, a spring insecurely attached to chassis or axle, brake disc or drum excessively weakened, insecure or fractured. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1980 BMW Alpina reliable for MOT?
With a 50% MOT pass rate, the 1980 BMW Alpina performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.