DVSA Statistics
2008 BMW M3
MOT Pass Rate & Pre-MOT Checklist
Used 2008 BMW M3s usually pass their MOT, but around 9% still fail, most often for a tyre seriously damaged, tyre tread depth not in accordance with the requirements and a suspension pin, bush or joint excessively worn. Based on 1,241 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 1,241 DVSA anonymised MOT tests · About this data
Pass Rate
90.7%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 1,241 recorded tests.
Pre-MOT Checklist for 2008 BMW M3
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW M3.
Frequently Asked Questions
Is a 2008 BMW M3 likely to fail its MOT?
Based on DVSA statistics, the 2008 BMW M3 has a 90.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2008 BMW M3?
The most common MOT failure reasons for a 2008 BMW M3 are: a tyre seriously damaged, tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 BMW M3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre seriously damaged, tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 BMW M3s fail their MOT?
Around 9% of 2008 BMW M3s fail their MOT test, meaning roughly 1 in 11 don't pass first time. The most common reasons are a tyre seriously damaged and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 BMW M3 MOT?
Before your 2008 BMW M3 MOT, check these commonly-failed items: a tyre seriously damaged, tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 BMW M3 reliable for MOT?
With a 90.7% MOT pass rate, the 2008 BMW M3 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.