DVSA Statistics
2009 Buell Xb12 Xt Ulysses
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2009 Buell Xb12 Xt Ulysses (only 13 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 13 DVSA anonymised MOT tests · About this data
Pass Rate
92.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 13 recorded tests.
Pre-MOT Checklist for 2009 Buell Xb12 Xt Ulysses
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check rear reflectors are present, clean, and not cracked
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Buell Xb12 Xt Ulysses.
Frequently Asked Questions
Is a 2009 Buell Xb12 Xt Ulysses likely to fail its MOT?
Based on DVSA statistics, the 2009 Buell Xb12 Xt Ulysses has a 92.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2009 Buell Xb12 Xt Ulysses?
The most common MOT failure reasons for a 2009 Buell Xb12 Xt Ulysses are: brake lining or pad worn below 1.0mm, reflector missing or reflecting white to the rear, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2009 Buell Xb12 Xt Ulysses fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake lining or pad worn below 1.0mm, reflector missing or reflecting white to the rear, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2009 Buell Xb12 Xt Ulyssess fail their MOT?
Around 8% of 2009 Buell Xb12 Xt Ulyssess fail their MOT test, meaning roughly 1 in 13 don't pass first time. The most common reasons are brake lining or pad worn below 1.0mm and reflector missing or reflecting white to the rear. Pre-checking these items can significantly improve your chances.
What should I check before my 2009 Buell Xb12 Xt Ulysses MOT?
Before your 2009 Buell Xb12 Xt Ulysses MOT, check these commonly-failed items: brake lining or pad worn below 1.0mm, reflector missing or reflecting white to the rear, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2009 Buell Xb12 Xt Ulysses reliable for MOT?
With a 92.3% MOT pass rate, the 2009 Buell Xb12 Xt Ulysses performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.