Skip to content
MOTCHECK
Beta

DVSA Statistics

2008 Buell Xb12s
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2008 Buell Xb12s (only 37 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

89.2%

Pass Rate

Based on 37 DVSA anonymised MOT tests · About this data

Pass Rate

89.2%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A footrest missing or insecure

    22.2%
  2. 2

    A transmission belt, chain, sprocket or pulley excessively loose or worn

    22.2%
  3. 3

    Exhaust noise levels in excess of those permitted

    11.1%
  4. 4

    A wheel bearing excessively rough

    11.1%
  5. 5

    Reflector missing or reflecting white to the rear

    11.1%

Based on DVSA statistics from 37 recorded tests.

Pre-MOT Checklist for 2008 Buell Xb12s

Based on common failure points for this model, check these items before your MOT:

  • 1

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

  • 2

    Check rear reflectors are present, clean, and not cracked

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Buell Xb12s.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2008 Buell Xb12s likely to fail its MOT?

Based on DVSA statistics, the 2008 Buell Xb12s has a 89.2% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2008 Buell Xb12s?

The most common MOT failure reasons for a 2008 Buell Xb12s are: a footrest missing or insecure, a transmission belt, chain, sprocket or pulley excessively loose or worn, exhaust noise levels in excess of those permitted. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2008 Buell Xb12s fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a footrest missing or insecure, a transmission belt, chain, sprocket or pulley excessively loose or worn, exhaust noise levels in excess of those permitted. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2008 Buell Xb12ss fail their MOT?

Around 11% of 2008 Buell Xb12ss fail their MOT test, meaning roughly 1 in 9 don't pass first time. The most common reasons are a footrest missing or insecure and a transmission belt, chain, sprocket or pulley excessively loose or worn. Pre-checking these items can significantly improve your chances.

What should I check before my 2008 Buell Xb12s MOT?

Before your 2008 Buell Xb12s MOT, check these commonly-failed items: a footrest missing or insecure, a transmission belt, chain, sprocket or pulley excessively loose or worn, exhaust noise levels in excess of those permitted. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2008 Buell Xb12s reliable for MOT?

With a 89.2% MOT pass rate, the 2008 Buell Xb12s performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.