DVSA Statistics
2007 Buell Xb12x Ulysses
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2007 Buell Xb12x Ulysses (only 29 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 29 DVSA anonymised MOT tests · About this data
Pass Rate
96.6%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 29 recorded tests.
Pre-MOT Checklist for 2007 Buell Xb12x Ulysses
Based on common failure points for this model, check these items before your MOT:
- 1
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Buell Xb12x Ulysses.
Frequently Asked Questions
Is a 2007 Buell Xb12x Ulysses likely to fail its MOT?
Based on DVSA statistics, the 2007 Buell Xb12x Ulysses has a 96.6% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2007 Buell Xb12x Ulysses?
The most common MOT failure reasons for a 2007 Buell Xb12x Ulysses are: a shock absorber not functioning or leaking severely, exhaust noise levels in excess of those permitted, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2007 Buell Xb12x Ulysses fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a shock absorber not functioning or leaking severely, exhaust noise levels in excess of those permitted, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2007 Buell Xb12x Ulyssess fail their MOT?
Around 3% of 2007 Buell Xb12x Ulyssess fail their MOT test. The most common reasons are a shock absorber not functioning or leaking severely and exhaust noise levels in excess of those permitted. Pre-checking these items can significantly improve your chances.
What should I check before my 2007 Buell Xb12x Ulysses MOT?
Before your 2007 Buell Xb12x Ulysses MOT, check these commonly-failed items: a shock absorber not functioning or leaking severely, exhaust noise levels in excess of those permitted, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2007 Buell Xb12x Ulysses reliable for MOT?
With a 96.6% MOT pass rate, the 2007 Buell Xb12x Ulysses performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.