Skip to content
MOTCHECK
Beta

DVSA Statistics

1996 Carbodies Taxi/hire Car
MOT Pass Rate & Pre-MOT Checklist

Used 1996 Carbodies Taxi/hire Cars usually pass their MOT, but around 1 in 3 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn and a headlamp or light source missing, inoperative or more than â½ not functioning in the case of led. Based on 70 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

70%

Pass Rate

Based on 70 DVSA anonymised MOT tests · About this data

Pass Rate

70%

About average

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

10 minutes fix
Save Money

Headlight bulbs are a common MOT fail. Easy DIY replacement.

Fixes:A headlamp or light source missing, inoperative or more than ½ not functioning in the case of LED
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    7.2%
  2. 2

    A suspension pin, bush or joint excessively worn

    6.6%
  3. 3

    A headlamp or light source missing, inoperative or more than ½ not functioning in the case of LED

    6%
  4. 4

    The aim of a headlamp is not within limits laid down in the requirements

    5.4%
  5. 5

    Vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced

    5.4%

Based on DVSA statistics from 70 recorded tests.

Pre-MOT Checklist for 1996 Carbodies Taxi/hire Car

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

Why Trust This Data?

Official UK Government Source

This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.

Understanding the Statistics

This page is based on 70 MOT tests from the 2023 DVSA dataset. Your 1996 Carbodies Taxi/hire Car was 27 years old when this data was collected and is now 30 years old.

Sample Size

Moderate confidence - 70 tests (interpret with caution)

Limitations

Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Carbodies Taxi/hire Car.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1996 Carbodies Taxi/hire Car likely to fail its MOT?

Based on DVSA statistics, the 1996 Carbodies Taxi/hire Car has a 70% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 1996 Carbodies Taxi/hire Car?

The most common MOT failure reasons for a 1996 Carbodies Taxi/hire Car are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, a headlamp or light source missing, inoperative or more than â½ not functioning in the case of led. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1996 Carbodies Taxi/hire Car fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, a headlamp or light source missing, inoperative or more than â½ not functioning in the case of led. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1996 Carbodies Taxi/hire Cars fail their MOT?

Around 30% of 1996 Carbodies Taxi/hire Cars fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.

What should I check before my 1996 Carbodies Taxi/hire Car MOT?

Before your 1996 Carbodies Taxi/hire Car MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, a headlamp or light source missing, inoperative or more than â½ not functioning in the case of led. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1996 Carbodies Taxi/hire Car reliable for MOT?

With a 70% MOT pass rate, the 1996 Carbodies Taxi/hire Car performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.