Skip to content
MOTCHECK
Beta

DVSA Statistics

2016 Caterham 310r
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2016 Caterham 310r (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Emissions levels exceed default limits

    30.8%
  2. 2

    A suspension pin, bush or joint excessively worn

    23.1%
  3. 3

    Emissions levels exceed the manufacturer's specified limits

    15.4%
  4. 4

    A suspension joint dust cover severely deteriorated

    15.4%
  5. 5

    Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.

    7.7%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2016 Caterham 310r

Based on common failure points for this model, check these items before your MOT:

  • 1

    Ensure engine is at operating temperature before test - take a good run beforehand

    Emissions – Common fail on this model

  • 2

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 3

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Caterham 310r.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2016 Caterham 310r likely to fail its MOT?

Based on DVSA statistics, the 2016 Caterham 310r has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2016 Caterham 310r?

The most common MOT failure reasons for a 2016 Caterham 310r are: emissions levels exceed default limits, a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2016 Caterham 310r fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: emissions levels exceed default limits, a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2016 Caterham 310rs fail their MOT?

Around 50% of 2016 Caterham 310rs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are emissions levels exceed default limits and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.

What should I check before my 2016 Caterham 310r MOT?

Before your 2016 Caterham 310r MOT, check these commonly-failed items: emissions levels exceed default limits, a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2016 Caterham 310r reliable for MOT?

With a 50% MOT pass rate, the 2016 Caterham 310r performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.