DVSA Statistics
2008 Cpi Aragon 50 Gp
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2008 Cpi Aragon 50 Gp (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Brake light bulbs are easy to replace yourself.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2008 Cpi Aragon 50 Gp
Based on common failure points for this model, check these items before your MOT:
- 1
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
- 2
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Cpi Aragon 50 Gp.
Frequently Asked Questions
Is a 2008 Cpi Aragon 50 Gp likely to fail its MOT?
Based on DVSA statistics, the 2008 Cpi Aragon 50 Gp has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2008 Cpi Aragon 50 Gp?
The most common MOT failure reasons for a 2008 Cpi Aragon 50 Gp are: stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a shock absorber not functioning or leaking severely, excessive fluctuation in brake effort through each wheel revolution. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 Cpi Aragon 50 Gp fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a shock absorber not functioning or leaking severely, excessive fluctuation in brake effort through each wheel revolution. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 Cpi Aragon 50 Gps fail their MOT?
Around 50% of 2008 Cpi Aragon 50 Gps fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning and a shock absorber not functioning or leaking severely. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 Cpi Aragon 50 Gp MOT?
Before your 2008 Cpi Aragon 50 Gp MOT, check these commonly-failed items: stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a shock absorber not functioning or leaking severely, excessive fluctuation in brake effort through each wheel revolution. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 Cpi Aragon 50 Gp reliable for MOT?
With a 50% MOT pass rate, the 2008 Cpi Aragon 50 Gp performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.