Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Daihatsu Copen
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2010 Daihatsu Copen (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

83.3%

Pass Rate

Based on 6 DVSA anonymised MOT tests · About this data

Pass Rate

83.3%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Worn tyres are a safety issue and common MOT fail.

Fixes:Tyre tread depth not in accordance with the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    36.4%
  2. 2

    Tyre tread depth not in accordance with the requirements

    18.2%
  3. 3

    Stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning

    9.1%
  4. 4

    Exhaust noise levels in excess of those permitted

    9.1%
  5. 5

    Brake pipe damaged or excessively corroded

    9.1%

Based on DVSA statistics from 6 recorded tests.

Pre-MOT Checklist for 2010 Daihatsu Copen

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

  • 3

    Check brake lights illuminate when pedal is pressed - have someone help you check

    Lighting – Common fail on this model

  • 4

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

  • 5

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Daihatsu Copen.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Daihatsu Copen likely to fail its MOT?

Based on DVSA statistics, the 2010 Daihatsu Copen has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2010 Daihatsu Copen?

The most common MOT failure reasons for a 2010 Daihatsu Copen are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Daihatsu Copen fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Daihatsu Copens fail their MOT?

Around 17% of 2010 Daihatsu Copens fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Daihatsu Copen MOT?

Before your 2010 Daihatsu Copen MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Daihatsu Copen reliable for MOT?

With a 83.3% MOT pass rate, the 2010 Daihatsu Copen performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.