Skip to content
MOTCHECK
Beta

DVSA Statistics

1998 Daihatsu Fourtrak
MOT Pass Rate & Pre-MOT Checklist

Used 1998 Daihatsu Fourtraks usually pass their MOT, but around 1 in 3 still fail, most often for a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Based on 382 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

70.7%

Pass Rate

Based on 382 DVSA anonymised MOT tests · About this data

Pass Rate

70.7%

About average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake pipe damaged or excessively corroded
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A suspension pin, bush or joint excessively worn

    10.3%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired

    9.5%
  3. 3

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    5.7%
  4. 4

    Brake pipe damaged or excessively corroded

    3.8%
  5. 5

    A transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc

    3.2%

Based on DVSA statistics from 382 recorded tests.

Pre-MOT Checklist for 1998 Daihatsu Fourtrak

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Daihatsu Fourtrak.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1998 Daihatsu Fourtrak likely to fail its MOT?

Based on DVSA statistics, the 1998 Daihatsu Fourtrak has a 70.7% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 1998 Daihatsu Fourtrak?

The most common MOT failure reasons for a 1998 Daihatsu Fourtrak are: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1998 Daihatsu Fourtrak fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1998 Daihatsu Fourtraks fail their MOT?

Around 29% of 1998 Daihatsu Fourtraks fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 1998 Daihatsu Fourtrak MOT?

Before your 1998 Daihatsu Fourtrak MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1998 Daihatsu Fourtrak reliable for MOT?

With a 70.7% MOT pass rate, the 1998 Daihatsu Fourtrak performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.