DVSA Statistics
2010 Daihatsu Sirion
MOT Pass Rate & Pre-MOT Checklist
Used 2010 Daihatsu Sirions usually pass their MOT, but around 1 in 5 still fail, most often for a suspension pin, bush or joint excessively worn, a tyre seriously damaged and brake pipe damaged or excessively corroded. Based on 138 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 138 DVSA anonymised MOT tests · About this data
Pass Rate
81.2%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 138 recorded tests.
Pre-MOT Checklist for 2010 Daihatsu Sirion
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Daihatsu Sirion.
Frequently Asked Questions
Is a 2010 Daihatsu Sirion likely to fail its MOT?
Based on DVSA statistics, the 2010 Daihatsu Sirion has a 81.2% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Daihatsu Sirion?
The most common MOT failure reasons for a 2010 Daihatsu Sirion are: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, brake pipe damaged or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Daihatsu Sirion fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, brake pipe damaged or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Daihatsu Sirions fail their MOT?
Around 19% of 2010 Daihatsu Sirions fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a tyre seriously damaged. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Daihatsu Sirion MOT?
Before your 2010 Daihatsu Sirion MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a tyre seriously damaged, brake pipe damaged or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Daihatsu Sirion reliable for MOT?
With a 81.2% MOT pass rate, the 2010 Daihatsu Sirion performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.