DVSA Statistics
1990 Daimler Ds420 Limison
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1990 Daimler Ds420 Limison (only 1 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 1 DVSA anonymised MOT tests · About this data
Pass Rate
0%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 1 recorded tests.
Pre-MOT Checklist for 1990 Daimler Ds420 Limison
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Daimler Ds420 Limison.
Frequently Asked Questions
Is a 1990 Daimler Ds420 Limison likely to fail its MOT?
Based on DVSA statistics, the 1990 Daimler Ds420 Limison has a 0% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1990 Daimler Ds420 Limison?
The most common MOT failure reasons for a 1990 Daimler Ds420 Limison are: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, parking brake inoperative on one side. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Daimler Ds420 Limison fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, parking brake inoperative on one side. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Daimler Ds420 Limisons fail their MOT?
Around 100% of 1990 Daimler Ds420 Limisons fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Daimler Ds420 Limison MOT?
Before your 1990 Daimler Ds420 Limison MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, parking brake inoperative on one side. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Daimler Ds420 Limison reliable for MOT?
With a 0% MOT pass rate, the 1990 Daimler Ds420 Limison performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.